Zircon® 61903 StudSensor™ Pro SL-AC Finder with SpotLite® Pointing Sys

StudSensor™ Pro SL-AC quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. The patented SpotLite® Pointing System shines a beam of light on the wall to identify the target, and WireWarning detection indicates live AC voltage. Its tough, ergonomic housing withstands everyday jobsite use.

• Stud Scan mode locates the edges of wood or metal studs up to 3/4" (19 mm) deep
• Red LEDs light up every time a stud edge is approached
• The patented SpotLite® Pointing System and green LED signals when the stud edge is reached
• WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" (51 mm) deep
• Should scanning begin over a stud, Zircon® patented "over-the-stud" indicator alerts the user to start the scan in a new location
• Patented TruCal® technology calibrates to any wall's density and a steady green LED light alerts the user when the tool is calibrated and ready to scan
• DeepScan® mode for finding studs up to 1-1/2" (38 mm) deep behind drywall paneling, or plywood, or a combination of both, and through most bare wood flooring
• For safety it indicates the presence of AC voltage while scanning.

Specifications:

• Dimensions: 6.07" (H) x 2.70" (W) x 1.18" (D)
• Battery Type: 9-V alkaline (not included)
• Battery Life: alkaline battery
• position: Up to a depth of 3/4"
• AC Position Typically: 90-250 V at 50-60 Hz
• Operating Temperature: 20 degree to 120 degree F (-7 degree to 49 degree C)
• Storage Temperature: -20 degree to 150 degree F (-29 degree to 66 degree C)
• Humidity: 80% RH (noncondensing)
• Water Resistance: Splash and water resistant, not waterproof
• Depth:
  
  • Stud Scan mode: up to 3/4 (19 mm)
  • DeepScan mode: up to 1-1/2" (38 mm)