Ulta-Lit 3203-4 LED Keeper Christmas LED Light Set Repair Tool

The LED Keeper repair tool is a complete tool to diagnose and repair most LED light sets. LED Keeper uses insulation piercing to connect to the copper within the light set wires and illuminate functioning sections by creating mini-circuits. Success will be achieved through the process of elimination.

• Complete tool to diagnose and repair most LED light sets
• Traces the circuit to the point of interruption
• Includes 2 place markers, 2 replacement pods, bulb puller and bulb and fuse tester
• Uses one 9v battery, included.
• Plug the light set into an AC outlet. If entire string is unlit, go to Step 1B. If set is partially lit, use place markers provided to identify the faulty section. Place the markers at first and last unlit bulb.
• Unplug the set from the AC outlet and plug the failed LED light set directly into the LED Keeper cord.
• Start about halfway between the place markers. At that point, select a wire that attaches to a bulb socket and place it into the black hook at the front of the LED Keeper (Fig A). Harm will not be caused by piercing the wrong wire.
• Pull and hold the trigger. The LEDs on one side of the piercing should illuminate. If not, re-hook and try again. If still no illumination, choose another location between the place markers, re-hook, and pull trigger.
• Using wire cutters or scissors, cut both wires entering the failed socket as close to the socket as possible.
• Unscrew the Replacement POD cap counter-clockwise to open the base. Place each of the two cut wires into the "V" shaped channel on each side of the POD's base (See Fig B). The insulation of the wire does not need to be removed.
• After the wires are in place, squeeze the two halves of the POD base together to secure the connection. Twist the cap clockwise until fully tightened (Fig D).
• Plug the light set into an AC outlet and the set should illuminate.

Shipping calculated at checkout.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.