Seal-All® 380112 All Purpose Contact Adhesive & Sealant, 2 Oz
$16.17
Product Overview
SEAL-ALL is the all-purpose adhesive used by hobbyists and mechanics alike to seal, bond, insulate, waterproof and stick to a wide variety of materials. Use it on practically anything: wood, steel, aluminum and copper; most plastics and rubber; porcelain, glass and china; vinyl, fiberglass, canvas and leather; cardboard, paper and much more! Fast-drying and clear, SEAL-ALL can withstand changes in climate, insulating and toughening with age. Known as "the repair kit in a tube," it does not require mixing or heating, does not become brittle in cold weather and resists water, gasoline, oil and most solvents.
- Fast dry time – set in 2-3 minutes
- E-Z flow formula
- Gas & oil resistant
- Waterproof – bond remains secure even when exposed to water
- Abrasion resistant
- Temperature resistant – remains tough even in extreme temperatures
- Tube
- Carded.
- Follow these step-by-step directions when using Seal-All:
- To open, puncture seal with pointer cap. Hold tube upright until ready to use. Do not squeeze tube to force opening. Replace cap after each use
- Seal-All will set in about 2-3 minutes and reaches full cure in 2-6 hours. Cure time increases with lower temperatures and decreases with higher temperatures
- Paint over Seal-All for UV resistance
- Keep threads at the neck of the tube free of Seal-All residue
- Store unused Seal-All at room temperature with cap tightened.
- Seal-All is resistant to gasoline, oil, paint thinner, and most solvents. Seal-All is also water resistant immediately upon applications
- Seal-All adheres with superior strength to all substrates and materials except paper, cardboard and Styrofoam™. Always test a small area before full use
- Seal-All will set in 2-3 minutes and reaches full-cure in 2-6 hours. (Note: temperature and humidity will affect dry time.)
- No. Seal-All may be painted over for maximum UV resistance once cured
- Use for distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools and much more.
Specifications
- Size
- 2 Oz
- USE AS A SEALANT
- Apply directly to clean, dry surface. Hold firmly until product sets. Additional coats may be applied. Allow each layer to dry thoroughly. On leaking objects under pressure, tape over Seal-Al® with Duct® or masking tape. Additional coats may be applied over tape
- USE AS A CONTACT ADHESIVE
- Spread coating on each surface to be joined together. Allow to harden for 5-10 minutes, then press both surfaces together. Seal-All hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact and sufficient pressure is exerted to create full contact between both surfaces
- Brand
- Seal-All
- Mfr number
- 380112
- Item number
- 11327497
- UPC
- 076818801122
Shipping & Returns
Shipping calculated at checkout. Usually ships within 24 hours.
Not shipped to AK, AE, AA, AP, FM, GU, HI, MH, MP, PW, PR, VI.
Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.