Quikrete® 110160 Ready-To-Use Concrete Mix, 60 Lbs

QUIKRETE® Concrete Mix is the original 4000 psi average compressive strength blend of portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Pre-blended mixture of cement and aggregates for general structural uses, requiring only the addition of water.

• Original 4000 psi average compressive strength blend of portland cement, sand, gravel or stone
• Pre-blended mixture of cement and aggregates for general structural uses, requiring only the addition of water
• Just add water
• Use for any general concrete work.
• Foundation walls and footings
• Sidewalks, curbs, steps, ramps and walkways
• Appliance and equipment platforms
• Pipe and post footings
• Floor slabs and patios
• Pools, fish pools, stepping stones
• Splashblocks and bird baths
• Riprap & slope protection
• Driveway repairs.
• Quikrete concrete mix can be mixed in a barrel type concrete mixer or a mortar mixer.
• Choose the mixer size most appropriate for the size of the job to be done
• Allow at least 1 cu ft (28 l) of mixer capacity for each 80 lb (36.3 kg) bag of quikrete concrete mix to be mixed at one time
• For each 80 lb (36.3 kg) bag of quikrete concrete mix to be mixed, add approximately 6 pt (2.8 l) of fresh water to the mixer
• Turn on the mixer and begin adding the concrete to the mixer
• If the material becomes too difficult to mix, add additional water until a workable mix is obtained
• If a slump cone is available, adjust water to achieve a 2" - 3" (51 - 76 mm) slump
• Note - final water content should be approximately 6 - 9 pt (2.8 - 4.3l) of water per 80 lb (36.3 kg) bag of concrete. For other bag sizes, use table 2 to determine water content.

Shipping calculated at checkout. Usually ships within 24 hours.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.