PPG SIK41005/01 ProLuxe Cetol 1 RE Transparent Satin Wood Finish, Nat Oak, 1 Gal


Created with Sketch.
Shipping charges calculated at checkout.
Created with Sketch.
Shipping not available to AK,AE,AA,AE,AE,AE,AP,FM,GU,HI,MH,MP,PW,PR,VI

Request a Bulk Quote

Thank you for your quote request. We will be in touch.
Out of Stock

SKU: 12294015
MFG: SIK41005/01


A basecoat for exterior logs, siding and other vertical wood surfaces. Penetrating alkyd-oil formula, part of a 3-coat system. High-transparency transoxide pigments amplify depth of color, clarity and substrate protection. UV absorbers protect color and wood substrate. Water-repellent. Provides a mildew-resistant finish. Block resistance for additional color options on windows and door frames. Cetol 1 RE (Reduced Emissions) Wood Finish is a transparent exterior wood basecoat to be used with Cetol 23 PLUS RE Top Coat. Its oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Covers approximately 150-400 sq ft. Coverage depends on the type, age and texture of the wood and application method.

  • Size: 1 gallon
  • Color: Natural Oak
  • Finish: Transparent Satin
  • Penetrating alkyd-oil formula, part of a 3-coat system
  • High-transparency transoxide pigments amplify depth of color, clarity and substrate protection
  • Powerful UV absorbers protect color and wood substrate
  • Water repellent
  • Provides a mildew resistant finish
  • Ready for use and easy to apply
  • Microporous product which is waterproof, but allows wood to breathe
  • Solvent based technology
  • Mineral spirits clean up.


  • Compliance: VOC
  • Finish: Transparent Satin
  • Applicable Materials: Siding, Garage Doors, Outdoor Furniture, Trim, Windows, Fences, Doors and Log Homes
  • Application Method: Paint Brush, Spray, Roller
  • Capacity: 1 gal
  • Coverage: 150 - 200 sq-ft/gal On Rough And Weathered Surfaces, 250 - 400 sq-ft/gal On Smooth Surfaces Or Hardwoods
  • Flash Point: 120 deg F
  • Form: Liquid
  • Pigment: High-Transparency Transoxide
  • Resists: Harmful UV Rays and Minimize Peeling and Blistering
  • Series: Cetol 1 RE, SIK410
  • Type: Exterior
  • Usage: For Residential and Commercial Sites, Vertical Surfaces Doors, Windows and Their Frame, Exterior Only
  • Vehicles: Alkyd/Oil
  • Viscosity: < 0.07 sq-cm/s
  • V O C Content: < 275 g/L
  • Standards: OSHA Hazard Communication
  • Temperature Range: 50 - 90 deg F
  • Flammability Rating: 0.63 % Lower, 6.69 % Upper
  • Composition: Solvent Naphtha (Petroleum), Medium Aliph, Distillates (Petroleum), Hydrotreated Light, 3-Iodo-2-Propynyl Butylcarbamate, 2-Butanone Oxime, Cobalt Bis (2-Ethylhexanoate), Ethylbenzene
  • Curing Time: 12 hr To Touch, 24 hr To Recoat
WARNING: Cancer - www.P65Warnings.ca.gov