Permatex® 80638 Super Weatherstrip Adhesive, 2 Oz

Permatex® Super Weatherstrip Adhesive is a viscous liquid contact type cement for all types of weatherstripping and general purpose bonding. Super Weatherstrip Adhesive is an air-drying contact cement that allows quick bonding yet maintains enough versatility in tack to allow large areas to be spread and bonded at one time. The drying characteristics allow for repositioning parts after contact is made. The maximum strength of Super Weatherstrip Adhesive is attained after all the solvent has been released. Non-porous surfaces, if assembled while the adhesive is wet, will prevent the release of solvent, consequently, the adhesive will take longer to dry and develop maximum strength.

• Allows for repositioning parts after contact is made
• Withstands extreme temperatures
• Water resistant
• Resistant to gasoline, kerosene, antifreeze and most solvents
• A superior adhesive ideal for many applications including rubber, metal, auto or van carpeting and fabric-backed vinyl upholstery and automotive gaskets
• Carded.
• All types of weather stripping, door and trunk moldings.
• All types of weather stripping, door and trunk moldings.
• Carpeting, headliners, molding weatherstripping.
• Water resistant
• Excellent chemical resistance
• Fast drying
• Withstands temperature extremes.
• Auto carpeting
• Door and trunk moldings
• All types of automotive weatherstripping
• Vinyl tops
• Fabric backed vinyl upholstery.
• Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from the new weatherstripping.
• Apply a thin, even film to both surfaces.
• Allow to dry until the surfaces are tacky (about 3-4 minutes).
• Bond the two surfaces together, and apply enough pressure to produce uniform contact.
• Use lacquer thinner or any hydrocarbon solvent while still wet.
• Flash Point, TCC, degree Fahrenheit: -10
• Tack free time is 3-4 minutes. Substantial bond will form when the surfaces are mated. Maximum strength is obtained after the adhesive is completely dry. Force drying with moderate heat will increase strength. Cure times will vary with temperature, humidity and gap.
• Continuous, degree Celsius (degree Fahrenheit): -54 to 204 (-65 to 400)
• The product retains effective properties in contact with automotive fluids, such as motor oil, transmission fluids, alcohol and antifreeze solutions.
• This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as an adhesive for chlorine or other strong oxidizing materials.
• Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28 degree Celsius (46 to 82 degree Fahrenheit) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.

Shipping calculated at checkout. Usually ships within 24 hours.

Not shipped to AK, AS, AE, AA, AP, GU, HI, PR, VI.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.