Permatex® 80050 Clear RTV Silicone Adhesive Sealant, 3 Oz Tube

Permatex® Clear RTV Silicone Adhesive Sealant is a general purpose, single component, room temperature vulcanizing (RTV) compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Note: Not recommended for engine gasketing applications or windshield installation.

• General-purpose, clear RTV indoor/ outdoor sealant.
• Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops.
• Protects and repairs electrical wiring.
• May be applied to horizontal or vertical surfaces.Waterproof and flexible.
• Temperature range -75 degree Fahrenheit to 400 degree Fahrenheit (-59 degree Celsius to 204 degree Celsius); resists water, weather, and vibration
• Carded.
• Windshields, door frames, electrical connections, vinyl tops, seams and roofs (Not recommended for engine gasket applications).
• Windshields, hatches, electrical connections, seams and roofs.
• Windshields.
• Easy application
• Applied to horizontal or vertical surfaces
• Superior adhesion and flexibility
• Waterproofs
• Insulates
• Unaffected by vibration
• Non-flammable
• Non-toxic
• Metal
• Glass
• Wood
• Most plastics (excluding polyethylene and polypropylene)
• Silicone resin
• Vulcanized silicone rubber
• Ceramics
• Natural and synthetic fibers
• Painted surfaces.
• Lens housings
• Windshields (for sealing only; not for installation)
• Windows
• Door frames
• Housings and covers.
• Create a "Silicone Plug" by allowing excess material to extend beyond the extension nozzle or aerosol tip to cure, sealing and protecting the remaining product from moisture. For reuse, simply remove the cured product from the tip.
• Remove uncured product from parts and hand-tools with a dry cloth, if skinned over, break film with a dry cloth to remove as much as possible, and remove the remaining material with Permatex® Gasket Remover (not for use on painted surfaces) as previously stated.
• Clean hands with a dry cloth or Permatex® Fast Orange® hand cleaner.
• Extrusion rate @ 25degree Celsius, (grams/min): >220
• Flash Point degree Celsius, degree Fahrenheit: >93 (>200)
• Permatex® Clear RTV Silicone Adhesive Sealant cures on exposure to moisture in the air. The product cures tack free in 1 hour and fully cures in 24 hours. Cure times will vary with temperature, humidity and gap. Note: The curing process can cause corrosion to some surfaces, for critical applications use the Ultra Series silicones.
• Continuous, degree Celsius (degree Fahrenheit): -59 to 204 (-75 to 400)
• Intermittent, degree Celsius (degree Fahrenheit): -59 to 260 (-75 to 500)
• This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
• Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28 degree Celsius (46 to 82 degree Fahrenheit) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.

Free shipping on orders over $35. Usually ships within 24 hours.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.