Permatex® 80015 Form-A-Gasket® #2 Sealant, 1.5 Oz

$4.19

Created with Sketch.
Free shipping on order $35+
Created with Sketch.
Usually ships within 24 hours
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 10233505
MFG: 80015

Description

Permatex® Form-A-Gasket® No. 2 Sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.

  • Size: 1.5 ounce, tube
  • Slow-drying, non-hardening brush-top sealant
  • Approved for use in aviation as well as automotive applications
  • Temperature range -65 degree Fahrenheit to 400 degree Fahrenheit (-54 degree Celsius to 204 degree Celsius); resists gasoline, oil and grease
  • Carded.

Suggested Applications:

  • Valve cover gaskets, oil pan gaskets.

Benefits:

  • Improves reliability
  • Extends gasket life
  • Stops leakage
  • Excellent for metal to metal assemblies
  • Slow drying
  • Flexible setting.

Typical Applications:

  • Valve cover gaskets
  • Oil pan gaskets
  • Threaded connections
  • Cover plates
  • Hose connections.

Directions For Use:

  • Remove all previous material from mating surfaces. Permatex® Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
  • For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake and Parts Cleaner.
  • Remove cap, puncture tube or cartridge seal and attach extension nozzle (if provided).
  • When used as a gasket dressing, spread product with a spatula to a uniform film on one side of gasket and then position it on the assembly. Coat the second side of gasket and re-assemble. Slower drying formula increases work time.
  • Assembly is operational after 4 hours, full cure is affected after 24 hours.

For Cleanup:

  • The product can be removed from metal surfaces with isopropyl alcohol. If the sealant has been dried for a long time or at high temperatures, cover the sealant with alcohol and allow to soften overnight.
  • Clean hands with Permatex® brand hand cleaners.

Properties Of Uncured Material:

  • Chemical Type: Modified resin, fillers and alcohol
  • Appearance: Black paste
  • Odor: Alcoholic
  • Specific Gravity: 1.5
  • Viscosity: Viscous paste

Typical Curing Performance:

  • Permatex® Form-A-Gasket® No. 2 Sealant once applied, develops a hard, semi-flexible sealant by solvent evaporation. Dry times will vary with temperature, humidity and gap.

Typical Environmental Resistance:

  • Continuous, degree Celsius (degree Fahrenheit): -54 to 204 (-65 to 400)

Chemical / Solvent Resistance:

  • The product retains effective properties in contact with water, ethylene glycol, non-ethanol containing gasoline, motor oil, transmission fluid, and sea water.

General Information:

  • This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
WARNING: This product can expose you to chemicals including Methyl isobutyl ketone, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Specifications

MFR:
80015
SKU:
10233505
UPC:
686226800152
Brand:
Permatex
Length:
7
Width:
2
Height:
1
Weight:
1.0 lb