Permatex® 14600 Cold Weld Bonding Compound, Two 1 Oz Tubes
Permatex® 14600 Cold Weld Bonding Compound, Two 1 Oz Tubes
$11.54
SKU: 10375156
MFG: 14600
Description
Permatex® Cold Weld is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300 degrees Fahrenheit intermittent. Over 3,000 PSI shear strength on steel.
- Size: Two 1 ounce tubes
- Two part adhesive and filler eliminates need for welding or brazing
- Once cured, can be drilled, tapped or filed
- Resists most automotive and shop fluids
- No heating required
- Holds in 10- 15 minutes
- Useable in 30 minutes
- Good moisture resistance
- Withstands extreme temperatures
- Non-flammable
- Carded.
Typical Applications:
- Cracked transmission cases
- Chipped heads
- Rear end castings
- Cracked blocks
- Cracked intake manifolds
- Damaged keyways
- Split stampings.
Suggested Applications:
- Aluminum, steel, brass, bronze, castings and stampings.
Directions For Use:
- Before starting, make sure your work area is protected from accidental spills. Surfaces must be clean, dry and free of grease and oil.
- Roughen smooth surfaces to be repaired with sandpaper.
- Apply in ventilated area. Vapors may irritate eyes and nose.
- Squeeze out equal amounts of bonding agent and curing agent.
- Mix together thoroughly until color is uniform.
- Apply immediately to both surfaces and press together. Remove excess glue at once.
- Allow bond to set for 10 minutes before moving.
- After 16 hours, typical shear strength on steel is 3000 PSI.
- Curing time may be slower in cold weather.
Specifications
MFR:
14600
SKU:
10375156
UPC:
686226146007
Brand:
Permatex
Length:
6
Width:
3
Height:
1