PC-Marine 025567 Epoxy Repair Putty 2 Oz, White


Free shipping on order $35+
Created with Sketch.
Usually ships within 24 hours

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11247667
MFG: 025567


PC-Marine Epoxy Repair Putty is a kneadable epoxy putty for use in wet & underwater applications. Changes from green to white once mixed & has a working time of 15-20 minutes. A cure time of approximatley 60 minutes.  PC-Marine is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply.

Note: PC-Marine will not bond to wax paper, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.

  • Size: 2 ounce
  • Kneadable epoxy putty for use in wet & underwater applications
  • Changes from green to white once mixed & has a working time of 15-20 minutes
  • A cure time of approximatley 60 minutes
  • Use inside or out, in fresh or salt waterrepair boats, water tanks fish boxes, spas, tubs. Gutters etc.
  • Can be drilled, filled, sawed, & painted

Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing warm putty to room temperature or above. Powder on hands (corn starch, baby powder) is helpful to minimize sticky epoxy contact before hardening begins.

Note: Use latex gloves to avoid any issues.

For best results, surface should be cleaned and free of rust, dust, and oil. Solvents such as denatured alcohol can be used to remove most contaminants. Whenever possible, lightly sand or rough up the surface to improve adhesion. For a smooth, finished surface, hand rub with wet finger or cloth prior to cure. Denatured alcohol is excellent for smoothing, shaping, and forming of putty epoxy. PC Marine cures well even at cold temperatures (40°F). PC Marine is supplied in premeasured sticks. The texture of the putty is such that it is slightly tacky but does not stick aggressively to fingers. The putty holds its shape well and can be used in vertical and overhead applications.

Holes in Fiberglass, PVC, Boats, Spas, Swimming Pools and more.

Physical Properties:

Color (Component A) White
Color (Component B) Green
Color (Mixed) White
Work Time (70°F) 15 Minutes
Cure for Service 60 Minutes
Elongation 1%
Conduction (Electric) Non Conductive
Thermal Shock Excellent
Toxicity Non Toxic Once Cured
Heat Range -20 to 200°F

Test Methods/Results:

Tensile Shear Strength ASTM D 1002 700 PSI
Compressive Yield ASTM D 695 12000 PSI
Hardness Shored ASTM D 2240 75 (1wk)
Heat Deflection ASTM D 648 120°F


MSDS Sheets,