Minwax® 230204444 Water Based Oil-Modified Polyurethane, 1/2 Pt, Semi-Gloss

A clear, fast-drying finish that combines superior durability with the warmth and beauty of traditional polyurethane. It is waterbased, therefore it is lower in odor than traditional solvent-based polyurethanes and cleans up easily with warm water. It protects and adds beauty to interior wood surfaces such as furniture, cabinets, floors and doors.

• VOC
• Water based
• Ultra fast drying
• Low Odor
• Easy water clean up
• Maximum VOC 275 G/L
• Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
• Sand to obtain a smooth, uniform surface. Do not use steel wool. Remove all sanding dust. Thoroughly wipe clean with a damp cloth. Allow to dry completely.
• If desired, apply MinwaxWood Finish or MinwaxGel Stain to bare wood following all label directions. Wait 8 hours before applying Water Based Polyurethane over stain.
• Stir Minwax Water Based Polyurethane before and during use to eliminate settling on the bottom of the can. Stir in such a manner as to rotate the product from the bottom to the top of the can. NEVER SHAKE.
• Apply a THIN coat of Water Based Polyurethane using a high quality synthetic bristle brush or foam brush.
• Let dry 2 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.
• Apply a second coat. Water Based Polyurethane requires a third coat - repeat step 6 before application.
• After final coat, allow 24 hours before light use.
• What is Minwax Water Based Oil-Modified Polyurethane?Water Based Oil-Modified Polyurethane is a clear, ultra fast-drying finish that combines superior durability with the warmth and beauty of traditional polyurethane. Because it's water-based, it has little odor and cleans up easily with warm water.
• Where can I use Water Based Oil-Modified Polyurethane?Water Based Oil-Modified Polyurethane is ideal for use on all interior bare or stained wood surfaces including furniture, cabinets, doors and floors. It can be applied over oil-based stains like Minwax Wood Finish or Minwax Gel Stain. It also can be applied over Minwax Water Based Wood Stain wood tones, provided the stain has dried completely.
• How many coats do I need to apply?Three coats are recommended.
• Can I mix Minwax Water Based Oil-Modified Polyurethane with Minwax Fast-Drying Polyurethane?No. The oil-based and water-based products are not compatible and they should not be mixed together. However, the results are the same—a beautiful, durable finish!
• Can I apply Water Based Oil-Modified Polyurethane over Fast-Drying Polyurethane or vice versa?Yes. The two products can be applied over each other as long as the first has fully cured. Follow the directions for the product you are using. Be sure to apply each coat with only one product. Do not finish part of a surface with one topcoat and part with the other as this could result in a uneven appearance across the surface of the wood.
• What is the V.O.C. level of Water Based Oil-Modified Polyurethane?Water Based Polyurethane has a maximum V.O.C. of 275 g/L.

Free shipping on orders over $35.

Not shipped to AK, AS, AE, AA, AP, GU, HI, PR, VI.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.