Minwax® 15215 Lacquer Sanding Smooth Finish Sealer, 11.5 Oz Aerosol

Minwax® Lacquer Sanding Sealer is formulated to work as a base coat under Minwax® Clear Brushing Lacquer. Easy to sand and dries quickly. Seals the wood in just one coat. Use on woodwork, cabinets, furniture, doors, accessories.

• Easy to sand
• Dries quickly (in one hour)
• Seals the wood in just one coat
• Use on woodwork, cabinets, furniture, doors, accessories.
• Woodwork, cabinets, furniture, doors, accessories, not recommended for floors.
• Minwax® Clear Brushing Lacquer acts as its own sealer and can be used alone. However, applying Minwax® Lacquer Sanding Sealer provides added smoothness.
• Minwax® Lacquer Sanding Sealer is formulated to work as a base coat under Minwax® Clear Brushing Lacquer. It is easy to sand, dries quickly, and seals the wood in just one coat. Once sanded, it provides a smooth, even surface that is ready to be top coated with Minwax® Clear Brushing Lacquer.
• Usually, sanding between coats of lacquer is unnecessary. You can choose to sand between coats of lacquer if you want a very smooth finish, but you do not have to.
• Yes, Minwax® Lacquer Sanding Sealer can be applied over Minwax® Wood Finish™ stains, Minwax® Water Based Stains and Minwax® Gel Stains.
• Brushing lacquers work best with a natural bristle brush. When choosing an applicator, the most important factor is selecting a high quality brush with tapered bristles that will enable you to “flow” the lacquer onto the wood. Avoid over-brushing, which can leave brush marks in the dried film. Do not use a foam brush, since it will dissolve!
• Surface must be dry and free of old finished in poor condition, paint, wax, grease, polish, dirt or other foreign matter. Note: Do not apply lacquer over polyurethane finishes
• Sand the wood to obtain a smooth, uniform surface. Remove all dust with cloth dampened with mineral spirits
• Shake the can of Minwax® Clear Brushing Lacquer vigorously for two minutes. Shake for 10 seconds occasionally during use
• Apply thin coats to avoid runs and sags
• Let dry at least 30 minutes, then sand with 220 grit sandpaper in the direction of the wood’s grain. Remove all sanding dust. Note: You can choose to stain with Minwax® Wood Finish™ stain prior to applying sanding sealer. If you do stain, be careful not to sand through the stain
• Recoat after 30 minutes
• Apply three coats of Minwax® Lacquer according to its label directions. Do not apply polyurethane or other varnishes over Minwax® Lacquer Sanding Sealer.
• If you scrape, sand or remove old paint, you may release lead. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Free shipping on orders over $35. Usually ships within 24 hours.

Not shipped to AK, AS, AE, AA, AP, GU, HI, PR, VI.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.