Masterchem 13000 Kilz Stain Block Primer, 5 Gallon

"Masterchem" Primer/Sealer

KILZ® PREMIUM is our premier water-based primer that delivers professional results on both interior and exterior surfaces. It blocks light to medium stains and has a thick white finish for high hide.

Features :

• Blocks out most stains caused by water, tannin, ink, pencil, marker and grease. Mildew resistant coating and a rust inhibitive metal primer
• Fast drying. Can be topcoated with latex or oil-based paint
• Low VOC
• Easy clean up
• Stainblocker
• Interior / Exterior - Water - Based
• The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
• For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming.
• Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
• Wash the area with a mildew remover, rinse with water and allow to dry before priming.
• KILZ PREMIUM may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ PREMIUM.
• It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS.
• Eye protection is recommended.
• A small amount of water may be added for spray applications, but do not thin for stainblocking applications.
• Stir thoroughly before and occasionally during use.
• Apply using a brush, roller or sprayer.
• Only apply if surface, air and product temperatures are between 50°-90°F.
• Prime the entire surface to ensure a uniform appearance of the topcoat.
• After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
• Tinting is not recommended for stainblocking applications. KILZ PREMIUM may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended.
• Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.

Shipping calculated at checkout.

Not shipped to AK, AE, AA, AP, GU, HI, PR, VI.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.