Loctite 1964642 PL 375 Heavy Duty Construction Adhesive, 10 Oz


Created with Sketch.
Shipping not available to AK,AE,AA,AE,AE,AE,AP,FM,GU,HI,MH,MP,PW,PR,VI
Free shipping on order $35+

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11532853
MFG: 1964642


Loctite® PL® 375 VOC Heavy Duty Construction Adhesive is a versatile premium grade adhesive for more demanding construction jobs. Provides a professional strength bond with exceptional holding power for a wide variety of building materials. It is tough, long lasting and moisture resistant. Bridges irregularities on uneven surfaces. For indoor and outdoor use. Low VOC formulation meets stringent State and Federal regulatory requirements.

  • 10 Oz
  • Ultra low VOC content
  • Meets stringent state & federal VOC regulatory requirements
  • Water-based
  • Non-flammable, environmentally friendly, non-toxic
  • Low odor
  • Great for indoor projects – no strong solvent odor
  • Bonds to most building materials
  • Provides a strong, durable bond to multiple surfaces
  • Gap filling
  • Will bridge minor gaps when bonding irregular surfaces
  • Easy cleanup with water (uncured adhesive)
  • Eliminates the use of harsh cleaning chemicals
  • High grab
  • Reduces nailing and fastener requirements by up to 50%
  • Meets ASTM C-557 VOC complaint
  • For members in VOC restricted area 7% VOC.

Recommended For:

  • Installing sub-floors, metal and wood studs or strapping to concrete, wood furring strips to concrete floors for carpet installation, mounting paneling, and much more.
  • Bonding to a large variety of building materials including wood, concrete, brick, drywall, metal, fiberglass panel, wallboard and cork.

Not Recommended For:

  • Polyethylene, polypropylene, Nylon™ or Teflon™
  • Cement Board (Durock™)
  • Exterior applications where rain is expected within 24 hours
  • Applications requiring temperature resistance greater than 170°F (77°C)
  • Underwater applications or permanent water immersion
  • Use on mirrors and metals that will corrode
  • Bonding two non-porous surfaces.


Safety Precautions:

  • Wear gloves. Interior applications require ventilation to the outside during application and cure. Wash hands after use.


  • The temperature of the product, the surfaces and the working area must be above 40°F (4°C) and below 100°F (38°C). For best performance, apply adhesive at 70°F (21°C). Ensure surfaces to be bonded are clean, dry, structurally sound and free of dust, grease, oil, and other foreign contaminants. Pre-cut and fit materials before applying adhesive. Cut off tip of cartridge in an ''X'' cutting method, cutting both sides of the nozzle. Puncture inside seal of cartridge.


  • Using a caulking gun, apply adhesive to one of the surfaces to be bonded. Press materials firmly together. Repositioning time is approximately 15 minutes. After use, wipe off nozzle tip and recap immediately.


  • Clean tools and uncured adhesive residue immediately with warm water and soap. Cured adhesive may be carefully cut away with a sharp edged tool.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


MSDS Sheets,