Heath® Zenith HZ-5316-BZ Deluxe Replacement Motion Sensor w/ DualBrite
Deluxe Replacement Motion Sensor with DualBrite, a patented Heath® Zenith Technology that provides Energy Saving 2 level lighting operating at half power until motion is detected and full power when motion is detected. Sensor is hardwired and will fit all of our security lights that are 240 degrees. It will screw into a standard 1/2 knockout. Perfect for replacing a broken or worn out motion sensor for a light fixture. When motion is sensed, the Light Control will turn on the fixture for the amount of time you set (1, 5, or 10 minutes) then automatically turn the light off. The built in photocell keeps the light off during the day when it is not needed then allows the motion sensor to take over at night. Manual mode allows the Light Control to be turned on and off with a light switch if desired. The patented DualBrite Timer will cause the light to come on at half brightness for a selected amount of time (Off, 3 hours, 5 hours, or until dawn) after dusk. Selecting Off disables this feature. If motion is sensed while in DualBrite mode, the light will turn on to full bright for the set on-time, then return to dim mode.
- Finish: Bronze
- Plastic construction
- Deluxe replacement motion sensor with Dualbrite
- A patented Heath® Zenith Technology that provides Energy Saving 2 level lighting operating at half power until motion is detected and full power lighting when motion is detected
- Provides soft accent lighting at dusk
- When motion is detected, light automatically switches to full bright lighting for a pre-selected amount of time (1, 5, or 10 minutes) light will then automatically return to accent mode, 50% power
- Accent lighting will begin at dusk and can be pre-selected to stay on for 3 hours, 6 hours, or until dawn
- Sensor is hardwired and will fit all of our security lights that are 240 degrees
- Will screw into a standard 1/2 knockout
- Up to 100' detection range
- Selectable light timer (Test, 1 minute, 5 minute, or 20 minute)
- Adjustable detection sensitivity
- 240-degree Motion Replacement Sensor for HZ-5311-BZ, HZ-5318-BZ, HZ-5512-BZ and HZ-5597-BZ
- Dimensions: 3.125" (W) x 4" (D) x 2.75" (H).