Gorilla 8005202 All-Purpose Construction Adhesive, 9 Oz
Description
Gorilla Construction Adhesive is a tough, versatile, and water resistant formula that instantly grabs surfaces, offers superior strength, and bonds virtually any surface including wood, drywall, concrete, paneling, trim & molding, ceramic, tile, and more! This all-purpose construction adhesive can be used indoor and outdoor, is repositionable for up to 15 minutes, is paintable, and is easy to clean up with soap and water.
- Size: 9 ounce
- All Purpose
- Instant grab - holds in 0 seconds
- Easy to dispense
- Repositionable up to 15 minutes
- Paintable
- Indoor/outdoor - water resistant
- Easy Clean Up
- Low Odor.
- Meets ASTM C557: Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing.
Directions:
- To Open: Cut nozzle at 45 degree angle to desired bead size. Puncture inner foil seal.
-
To Use: All surfaces should be clean and free of dirt, grease and oil. One surface must be porous. Best if used above 40 degreeF.
- Insert into cartridge gun.
- Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
- Within 10 minutes, press surfaces firmly together. Repositionable for up to 15 minutes.
NOTE: Heavy items may require temporary support.
Specifications:
- Application Temperature: Best above 40 degree F
- Service Temperature: 0 degree to 120 degree F
- Indoor: Yes
- Outdoor: Yes
- Moisture Resistant: Water Resistant
- Paintable: Yes, in 1 hour using acrylic/latex paints. All other paints, wait 24 hours.
- Sandable: Yes
- Stainable: No
- Cured Color: Tan
- Technical Standards: Meets ASTM C557 and ASTM D3498: dry lumber specifications.
- Storage Tips: Store in a cool, dry location. Do not freeze. Store away from children and animals.
FAQs:
What is the best way to open the Gorilla Construction Adhesive cartridge?
- Cut nozzle at a 45 degree angle to your desired bead size.
- Puncture the foil seal inside the tube using a long, thin, sharp object. Foil must be punctured sufficiently for formula to flow through.
What is the best way to prepare surfaces for bonding?
- All surfaces should be clean and free of dirt, grease and oil. One surface must be porous (e.g. wood, brick, etc.).
What's the best way to store Gorilla Construction Adhesive?
- Gorilla Construction Adhesive is best if stored in a cool, dry location. Do not freeze. Store away from children and animals.
Is Gorilla Construction Adhesive VOC compliant?
- Yes, Gorilla Construction Adhesive has less than 3% VOC content.
How do I remove Gorilla Construction Adhesive from my surface?
- To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project with soap and water. For cured/dried adhesive, mechanical means such as cutting, sanding, or scraping are necessary.
How do I remove Gorilla Construction Adhesive from my body/skin?
- Wash skin with soap and warm water.