Fram® PH3675 Extra Guard® Oil Filter

$8.07

Free shipping on order $35+
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11721237
MFG: PH3675

Description

With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.

  • Engineered for conventional motor oil
  • Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles1
  • 95% filtration efficiency2
  • Internally lubricated sealing gasket for easier filter removal
  • Start-up engine protection delivered through a precision molded Nitrile Anti-drainback valve
  • Precision coil spring with glass fiber reinforced Nylon poppet relief valve3
  • SureGrip® coating provides a non-slip finish for easier installation and removal
  • Perfect filter for everyday drivers who perform frequent maintenance on their vehicles.

Installation Instructions

  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
  • Place a drain pan under the oil filter and unscrew oil filter
  • Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
  • Apply film of clean oil to filter gasket. Do not use grease
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
  • Check owner's manual for correct oil specification, viscosity and amount
  • Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Specifications

MFR:
PH3675
SKU:
11721237
UPC:
009100381149
Brand:
Fram
Length:
4
Width:
4
Height:
5