Fram PH20A Extra Guard® Spin On Oil Filter, Full Flow

$6.19

Created with Sketch.
Usually ships within 24 hours
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11158972
MFG: PH20A

Description

Engineered for Conventional Motor Oil. Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2

  • PH20A
  • Full flow, spin on lube oil filter
  • Heavy duty
  • Designed with components that meet demands for regular oil change intervals according to oem recommendations
  • Cellulose media for efficiency & capacity for particle removal
  • CJ4 oil compatible
  • Gasket materials that stand up to diesel engine environments
  • Statistical process control insures quality manufacturing

Technology:

  • With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
  • Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles

Installation Instructions:

  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
  • Place a drain pan under the oil filter and unscrew oil filter
  • Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
  • Apply film of clean oil to filter gasket. Do not use grease
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
  • Check owner's manual for correct oil specification, viscosity and amount
  • Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Specifications

MFR:
PH20A
SKU:
11158972
UPC:
009100028228
Brand:
Fram
Length:
4
Width:
4
Height:
6
Weight:
2.0 lb