Fram® PH16 Extra Guard® Oil Filter

$4.99

Created with Sketch.
Free shipping on order $35+
Created with Sketch.
Usually ships within 24 hours
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 10088551
MFG: PH16

Description

Engineered for Conventional Motor Oil. Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles. 95% filtration efficiency. With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.

  • Engineered for Conventional Motor Oil
  • Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles
  • 95% filtration efficiency
  • With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
  • Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
  • Principal applications: 1981-1994 Alpha Romeo, Case, Case/International, 1991-2001 Chrysler, 1964-1966 Chrysler, Crusader, 1974-1997 Ford, 1964 Ford, Hyster IHC-Navistar, Interceptor, John Deere, Mack Mercruiser, 1964-1971 MG/Triumph, 1995-1999 Mitsubishi, 1981-1985 Renault, 1963-1971 Renault, 1987-1990 Toyota, 1984-1985 Toyota, 1982-1971 Toyota, Volvo, 2001-2000 VW-Audi-Porsche
  • Refer to application guide for other applications

Product Specification:

  • Anti-Drainback Valve - YES
  • Base Gasket I.D. - 2.422
  • Base Gasket O.D. - 2.797
  • Base Gasket Thickness - 0.203
  • By-Pass Valve Setting - 12
  • Height - 3.688
  • Inside Diameter - 3/4-16 Th'd
  • Outside Diameter - 3.656
  • Style - 1
  • Turning Specification - 1

Installation Instructions:

  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
  • Place a drain pan under the oil filter and unscrew oil filter
  • Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
  • Apply film of clean oil to filter gasket. Do not use grease
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
  • Check owner's manual for correct oil specification, viscosity and amount
  • Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Specifications

MFR:
PH16
SKU:
10088551
UPC:
009100380128
Brand:
Fram
Length:
4
Width:
4
Height:
5
Weight:
1.0 lb