Fram PH10060 Extra Guard® Spin-On Oil Filter
Fram PH10060 Extra Guard® Spin-On Oil Filter
$11.24
SKU: 10892158
MFG: PH10060
Description
Engineered for conventional motor oil. Cellulose and glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2.
- PH3786
- Spin on oil filter
- Advanced engine protection uses cellulose & synthetic glass fiber blended media to provide 3 times more engine protection than the average of leading economy oil filters
- 95% dirt trapping efficiency.
Technology:
- With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, fram extra guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
- Extra guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
Installation Instructions:
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
- Place a drain pan under the oil filter and unscrew oil filter
- Clean mounting base making sure the "o" ring from the old filter is not stuck to the filter mount
- Apply film of clean oil to filter gasket. Do not use grease
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
- Check owner's manual for correct oil specification, viscosity and amount
- Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Specifications
MFR:
PH10060
SKU:
10892158
UPC:
009100532367
Brand:
Fram
Length:
4
Width:
4
Height:
4
