Devcon 24445 Flow-Mix Cold Weld Epoxy, Dark Gray, 14 ml

Devcon® Flow-Mix® Cold Weld Epoxy is an easy alternative to welding and soldering. Can be drilled, tapped, machined, filed, sanded and painted when fully cured. This state-of-the-art syringe automatically mixes epoxy hardener and resin during application. Eliminates hand mixing, messy clean up and the difficulty of applying to your surface. Comes with two Instant-Mix nozzles. Works best on steel, copper, aluminum, bronze, metal and iron. Does not bond to polyethylene or polypropylene plastics.

• Water resistant
• Carded.
• Pull plunger back slightly (1/8") to allow air bubbles to rise to top so that you do not push air bubbles into the flow-mix® nozzle
• To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mix in order for this product to cure properly
• Removable tape is good for putting on an area that you do not want epoxy to get on. Before the epoxy cures, remove the tape
• If you use both nozzles and there is epoxy remaining, you can hand mix.

Free shipping on orders over $35.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.