Dairyland Manosol Bulk Tank Cleaner, 11 lbs

Its a high foaming, mild alkaline cleaner for bulk tanks and manual cleaning of dairy equipment made of glass, metal, or plastic.

• 11 Lb.
• Powdered cleaner is a high foaming.
• Mild alkaline cleaner for bulk tanks & manual cleaning of dairy equipment made of glass, metal, or plastic.
• Immediately after the tank has been emptied of milk, rinse all surfaces with tepid 90°-120°F water.
• Remove all detachable equipment and make a solution of Manosol Bulk Tank Cleaner, at the rate of 1 ounce per the required gallons of hot (155°-170°F) water. See hardness table for recommended dilution. Brush the interior, especially the bottom of the cover, and all equipment thoroughly.
• After cleaning, rinse thoroughly with water at 120°F and allow to drain.
• Acid rinse with a solution of either Acid Rinse at a rate of 1 ounce per 5 gallons of warm (100°F) water, or Sterosol Milkstone Remover and Acid Rinse at a rate of 1 ounce per 6 gallons of warm (100°F) water to prevent milkstone buildup and water spotting. Twice each week, instead of acid rinsing, rinse with a solution of Sterosol Milkstone Remover and Acid Rinse at a rate of 1 ounce per 2 gallons of warm (100°F) water for 20 to 30 minutes for the control of milkstone in the bulk tank. Drain thoroughly.
• Before reuse, sanitize with a solution of either Steramine® at a rate of 1 ounce per 4 gallons of water (200 ppm) or Hypo-Chlor Formula 6.40 at a rate of 1 ounce per 2 gallons of water (200 ppm) at a temperature of 145°F, or follow local health recommendations. A minimum of a 2 minute contact time is required. Drain the used solution from the equipment and air dry.
• Immediately following use, pre-rinse with tepid water.
• Begin cleaning using either Manosol Bulk Tank Cleaner or Heavy Duty Dairy Utensil Cleaner according to their label directions at a temperature as warm as the hands can stand. Brush all surfaces. Wear rubber gloves if solution is irritating to hands.
• Acid rinse with a solution of either Acid Rinse at a rate of 1 ounce per 5 gallons of warm (100°F) water, or Sterosol Milkstone Remover and Acid Rinse at a rate of 1 ounce per 6 gallons of warm (100°F) water to prevent milkstone buildup and water spotting. Twice each week, instead of acid rinsing, rinse with a solution of Sterosol Milkstone Remover and Acid Rinse at a rate of 1 ounce per 2 gallons of warm (100°F) water for 20 to 30 minutes for the control of milkstone.
• Before reuse, sanitize with a solution of either Steramine® at a rate of 1 ounce per 4 gallons of water (200 ppm) or Hypo-Chlor Formula 6.40 at a rate of 1 ounce per 2 gallons of water (200 ppm) at a temperature of 145°F for 5 to 10 minutes, or follow local health recommendations. A minimum of a 2 minute contact time is required. Drain the used solution from the equipment and air dry.

Shipping calculated at checkout.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.