Ames® Research BWRF5 Water Base Block/Wall™ Liquid Rubber Coating, 5 G

A blend of adhesive, high strength, elastomeric, liquid rubber. It is designed especially for waterproofing in extreme situations. It is high in solids and dries to a tough elastic membrane that is up to 700% elastic to resist cracking and peeling. Ready to use - no mixing required. Block & Wall Liquid Rubber flows into cracks and crevices as a liquid and sets up as a durable rubber to seal leaks wherever they occur. The adhesive qualities in Block & Wall Liquid Rubber will help glue surfaces together to strengthen wall construction. An excellent coating for ICF (insulated concrete forms) as well as metal, wood, concrete, and many other applications. It is designed especially for waterproofing in extreme situations such as below-grade foundations, and basement walls. This coating contains no petroleum, is non-toxic, low odor, and environmentally friendly.

• Size: 5 Gallon
• Color: White
• Water base
• A blend of adhesive, high strength, elastomeric, liquid rubber
• Up to 700% elastic to resist cracking and peeling
• Ready to use - no mixing required
• Will help glue surfaces together to strengthen wall construction
• An excellent coating for ICF (insulated concrete forms) as well as metal, wood, concrete, and many other applications
• Designed especially for waterproofing in extreme situations such as below-grade foundations, and basement walls
• Contains no petroleum, is non-toxic, low odor, and environmentally friendly.

Where to Use:

• Block & Wall Liquid Rubber is an excellent coating for ICF (insulated concrete forms) as well as metal, wood, concrete, and many other applications. It is designed especially for waterproofing in extreme situations such as below-grade foundations, basement walls and water troughs.

Preparation:

• The surface must be clean, dry, and free of loose material before the coating application. Power wash thoroughly, if needed. Brush, trowel, or caulk all cracks greater than 1/8” wide with Ames® Blue Max™ trowel-grade coating and filler. Always run a test patch first in an inconspicuous area. This is to ensure that there is proper adhesion and drying, and that the product performs to your satisfaction. No need to shake or stir. It comes ready to use straight out of the can. Prime all surfaces generously with Ames’® Block & Wall™ Liquid Rubber.

Estimated Coverage:

• Standard product coverage on a smooth surface is 100 sq. ft. per one gallon, per coat (est. 10 mil). At least two coats are always recommended. More coats equal longer life. Rough surfaces will require additional product and drying time. Minimum application rate is two gallons per 100 square feet.

Clean-up, Storage, and Disposal:

• Clean tools and small spills with water. Store unused product in its original container, tightly sealed and protected from freezing. Dispose of this product in accordance with local, state, or federal requirements.