Amazing Goop 160035 Automotive Goop Adhesives/Sealant, 109.4 ML


Created with Sketch.
Shipping charges calculated at checkout.
Created with Sketch.
Shipping not available to AK,AE,AA,AE,AE,AE,AP,FM,GU,HI,MH,MP,PW,PR,VI

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 12073974
MFG: 160035



  • Size: 109.4 ML
  • Automotive repair
  • Bonds to metal, glass, plastic, vinyl, and leather
  • Use to attach loose auto trim and emblems; repair and attach cracked hoses; mend leather and vinyl upholstery; apply protective coating to battery terminals; and fix cracks in dashboards and paneling
  • Withstands heat up to 150-degrees Fahrenheit
  • Not recommended for bonding rearview mirror to front windshield

How To Use:

  • Please read all directions before using. Amazing GOOP should be used in a well-ventilated area
  • Surface should be clean, dry, and free from dirt. For best results, roughen surface before use. Best when used between 70° F (21° C) and 85° F (29° C)
  • Puncture the seal at the top of the tube using the pointer cap
  • Always test a small area to ensure proper application technique and dry time. Prolonged exposure to warm water may cause discoloration and possible loss of adhesion when exposed to chemicals used in hot tubs and pools, especially in outdoor locations. Amazing GOOP may be weakened by contact with certain highly plasticized materials
  • Apply Amazing GOOP directly to each surface to be bonded or repaired. Allow Amazing GOOP to partially cure, 2-10 minutes, before bringing surfaces together. Amazing GOOP hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact
  • Allow the repair to dry for 24 hours. Depending on the materials and the temperature maximum strength may not be reached for 48 to 72 hours. Cure time increases with lower temperatures and decreases with higher temperatures
  • Keep threads at the neck of the tube free of Amazing GOOP residue. To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap
  • Clean uncured adhesive with small amounts of acetone or naphtha; the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping
  • Store unused Amazing GOOP at room temperature with cap tightened


Amazing GOOP