Sani Seal BL01 Waxless & Repositionable Toilet Gasket

$15.97

Free shipping on order $35+
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11185315
MFG: BL01

Description

Unique design holds bolts up for quick and easy one person toilet installation without risk of knocking the bolts over. Sani Seal Waxless Toilet Gasket is a revolutionary development in Toilet Bowl-to-Flange sealing that is flexible, wax-less and repositionable. The unique design holds the bolts upright and the gasket in place. The Sani Seal makes installing your toilet extremely quick and easy.

  • No Messy Wax
  • Universal Fit; Fits All Flanges and All Standard Toilets
  • Holds the Bolts Upright
  • Strong Flexible and Resilient Material Moves with the Toilet
  • Allows the Installer Multiple Attempts at Installing the Toilet
  • Very Easy to Stack for Deep Flanges below 3/8"
  • Easy One Person Toilet Installation; No Need for a Spotter
  • Made in USA
  • No More Guess Work
  • Only One Seal Needed for Flanges 3/8" Above and Up to 3/8" Below
  • Works Well in Hot and Cold Temperatures, Including Radiant Heated Floors

Sani Seal Toilet Gasket is made of polyurethane foam that is repositionable, antimicrobial and functions no matter what the temperature, providing an easy trouble free installation. Sani Seal Toilet Gasket remains flexible and resilient even in extreme temperatures, it also provides a seal when the flange is not set level relative to the finished floor. Sani Seal Toilet Gasket can be used in applications where the flange is positioned up to 3/8" above the finished floor and as much as 3/8" below the finished floor.

Two Sani Seal Toilet Gasket's can be stacked to provide a seal when the gap is too large for one gasket without the risk of deforming and being pushed inward and creating a partial blockage in the flange. Sani Seal Toilet Gaskets also can be siliconed together or coated with plumbers paste for additional sealing properties, although not necessary. Also when resetting a toilet that has been set on wax, it is not necessary to clean the wax off completely, the wax will not affect the performance of Sani Seal Toilet Gasket. Sani Seal Toilet Gasket's unique design and structure make it extremely user friendly in providing a trouble free water and gas tight toilet seal.

Sani Seal Toilet Gasket is made of polyurethane foam that is repositionable, antimicrobial and functions no matter what the temperature, providing an easy trouble free installation. Sani Seal Toilet Gasket remains flexible and resilient even in extreme temperatures, it also provides a seal when the flange is not set level relative to the finished floor. Sani Seal Toilet Gasket can be used in applications where the flange is positioned up to 3/8" above the finished floor and as much as 3/8" below the finished floor.

Two Sani Seal Toilet Gasket's can be stacked to provide a seal when the gap is too large for one gasket without the risk of deforming and being pushed inward and creating a partial blockage in the flange. Sani Seal Toilet Gaskets also can be siliconed together or coated with plumbers paste for additional sealing properties, although not necessary. Also when resetting a toilet that has been set on wax, it is not necessary to clean the wax off completely, the wax will not affect the performance of Sani Seal Toilet Gasket. Sani Seal Toilet Gasket's unique design and structure make it extremely user friendly in providing a trouble free water and gas tight toilet seal.

Install Sani Seal In 4 Easy Steps! 

  • Remove Toilet
  • Scrape wax off flange and bottom of bowl
  • Place Sani Seal over flange and bolts
  • Set bowl in place and tighten bolts snug

Instructions:
Sani Seal Waxless Toilet Gasket is the easiest toilet seal on the market to use and install. Its forgiving material is highly resilient and flexible, allowing the installer multiple chances to install their toilet without risk of ruining the seal.

To get started you will need a few tools:

  • an adjustable wrench, a scraper or putty knife,
  • a Sani Seal Toilet Gasket (or 2 depending on the depth of your flange),
  • a new bolt kit,
  • and a hack saw or bolt cutters.

Shut off the water supply to the tank. Disconnect the supply line from tank. If you have an old stiff supply line we recommend you buy a new flexible supply line for a few dollars at your local hardware store.

Remove your beauty caps that are covering the bolts. If your old bolts are rusted take your hacksaw and cut between the plastic and the nut to get it loose. Once you remove the nut, pull your stool off.

You probably had an old wax ring installed so take out the old bolts and use your putty knife or scraper to scrape off any residue on the flange and bottom of the stool. It doesn't have to be perfect, this gasket works just fine with a little residue on the flange and stool.

Place the Sani Seal Toilet Gasket over the bolts and line them up. This is an image A great thing about this gasket is that it fits down over your bolts and helps hold them straight up for easy installation. If your flange sits below floor level more than 3/8″ this gasket is easily stacked. You can also use plumbers paste or silicon on top, in-between or below the gaskets for added protection, but it is not necessary. On a second floor or over a finished basement, we like to take silicon and fill in any voids on and around the flange so the water has no where to go but down the drain.

  If installing toilet to a shart offset flange, flange with a smaller waste outlet, or a ledge or shelf that does not allow the Sani Seal  Toilet Gasket to slide down into the floor flange, please install the Sani Seal Toilet Gasket as it is packaged with the flange folded in on itself and also upside-down.

Line your toilet up. It doesnt have to be perfect because this gasket is very forgiving and you can make some mistakes with no problems. Set the stool down on the gasket and straighten it up to the wall.

Lean on the toilet and feel it bottom out. Put the plastic cap bottom, washer and nuts on both bolts. Dont tighten one side down and then the other. Alternate tightening either side till they are snug, but don't crank down and over tighten them.

Cut off your bolt about 1/8″ above the nut with your hacksaw or bolt cutters. Place your beauty caps and snap them on.

Reconnect your new supply line and hand tighten it till it's snug. Turn your water on. Check for leaks from the supply line.

Your toilet is ready for use!

Specifications

MFR:
BL01
SKU:
11185315
UPC:
793573766328
Brand:
Sani Seal
Length:
15
Width:
12
Height:
2