Moldex® 4040 Multi-Surface Outdoor Cleaner, 1 Gallon

Moldex® power! Multi-purpose outdoor cleaner is a commercial strength multi-surface cleaner designed to clean dirt, grime and remove mold, mildew, algae stains from almost any surface. It was specifically formulated for vinyl & aluminum siding as well as wood, brick and concrete surfaces. It is useful on an array of surfaces and contains no bleach, ammonia or poisonous acids so it can be used safely around plants and shrubs.

• Gallon
• Great for removing mold, mildew & algae stains
• Multi-surface commercial strength cleaner
• Makes up to 11 (ready to use) gallons of solution
• Perfect for use in power washer machines
• Safe around plans and shrubs
• No bleach, ammonia, or acids

Applications:

• Recommended for all exterior siding (wood, vinyl, aluminum), roofing of all types (asphalt shingles, fiberglass, shingles, cedar tile), gutters, stucco, brick and cement block, masonry, concrete, driveways, walkways and walls, porch, screens, pool areas, engines and equipment, rv’s, patio furniture, and boats.

Instructions:

• When mixed (1:10) with water, one bottle of concentrate makes 11 gallons of premix, and cleans up to 2000 sq. ft. (less on rougher surfaces), and can be applied by pressure washer, pump-up sprayer, brush or roller. Contains anti-corrosive agents to safeguard pressure washer parts (bleach can erode o-rings).

Directions for Use (Manual Use Directions):

• Mix at 1:10 parts concentrate with water.
• Fill spray bottles, buckets, or pump sprayers and spray to wet the area to be cleaned. Work in manageable sections if cleaning a large area
• Wait several minutes to allow cleaner to work before wiping, scrubbing or mopping the surface clean
• Rinse with clean water, allow surfaces to dry before resuming use or traffic.

Pressure Washer Application:

• Rinse surrounding plants with water, before and after application
• Wet surface to be cleaned, prior to applying the product
• Place detergent application siphon tube and screen filter directly into container. Open meter valve (if applicable)
• For maximum product flow. For reservoir machines, pour product (full strength) into pressure washer
• Spray at low pressure onto a wet surface
• On vertical surfaces, always spray from the top down
• Allow product to remain on the surface for 3 to 5 minutes to penetrate. Do not allow product to dry on surface
• Remove siphon tube from solution and rinse surface with high pressure water spray thoroughly
• Flush siphon tube with clean water prior to storage.