Loctite® 1360350 Power Grab® Mounting Tape, 60" x 0.75", Holds 100 Lbs

Loctite® Power Grab® Mounting Tape is a permanent, super strong, double-sided tape for fast, clean and durable mounting applications indoors and outdoors. An entire roll can mount a 110 lb (50 kg) object. Loctite Power Grab Mounting Tape is waterproof and has high resistance to UV light, plasticizers and aging.

• 60" x 0.75"
• Waterproof
• Fast and clean
• Resistant to UV light and aging
• Permanent, super strong
• Double sided tape for fast, clean & durable mounting applications
• Ideal for indoor and outdoor use
• Long outdoor life
• An entire roll can mount a 110 lbs object.

 Recommended For:

• Ideal for mounting skirting boards, pictures, mailboxes, house numbers, hooks and automobile trim attachments (except for rearview mirrors)
• Applications on tiles, metal, wood, stone, glass and plastics including PVC, polyethylene, polypropylene and Nylon®.

 Not Recommended For:

• Water immersion
• Teflon® surfaces
• Contact with silicone.

Directions:

Preparation:

• Use above 50°F (10°C). Surfaces must be clean, dry and free of frost, grease, dust and other contaminants. Clean surfaces with acetone or rubbing alcohol.

Application:

• Using scissors or a knife, carefully cut off desired length of tape. Remove one of the protective red backing strips and press tape firmly onto object to be mounted. Ensure tape is flush with object with no gaps or air bubbles which may prevent adhesion. Remove the other protective red strip and mount object to desired surface. Avoid touching the tape with fingers during application, as the oil from fingers will lead to a decrease in adhesive strength. On a large surface area, apply strips vertically. Note: The tape or the objects cannot be repositioned once applied or mounted. Gap filling properties of the tape are limited to the thickness of the tape. Initial tack of the tape is very high but final bond strength is achieved after 24 hours. Tape can damage delicate surfaces. Test before use.