Product Overview
When you consider the alternatives, is there really any other choice than Fatwood®? It's 100% natural - no additives, chemicals or messy odors. It's important that relaxing in front of the fireplace or grilling a delicious meal is chemical free. And Fatwood® is safe, stable and waterproof. It's harvested using the latest sustainable forestry techniques and is the best way to get your fireplaces, pellet fuel stoves, grills, wood/coal stoves and campfires really cooking.
- 0.0375 cu.ft.
- 100% all natural pine wood
- Hand split approximately 8" length
- Safe, simple and mess free way to start any fire
- Use in fireplaces, pellet fuel stoves and barbecues
- Place 2 sticks in fire area and light with match.
- Fatwood® Firestarter consists of two parts: pinewood and the resin created in that very tree; It's 100% all-natural. As the tree matures, this natural resin moves downward, collecting in the stump.
- With this high concentration of natural resin, we don't need to add chemicals or additives like so much of our competition.
- All we need is two of our sticks to do the talking for us and, in a matter of minutes, we're usually roaring.
- Unlike most other fire starters, Fatwood® is ideal for any indoor or outdoor situation. There’s no spilling, no odors, no chance of flare-up and no dangerous toxins to breath. It’s safe and clean and Fatwood® has an indefinite shelf-life. You can use it to start your backyard grill or your indoor fireplace safely and easily, even when wet!
- So leave the kerosene-soaked products, the smelly fluids and the sawdust composites to the other guys. When you’re ready to put your fireplace, chimenea, grill or pellet or wood stove into action, grab two sticks of all-natural Fatwood®. That’s all you’ll need.
- An excess of ‘liquid sunshine’ dampening your plans? Not to worry. Fatwood® is practically submergible! The resin in our Fatwood® is so concentrated and water-repellent that it will spark right up, even when wet – making it perfect for outdoor activities like hiking, canoeing and kayaking.
- Our Fatwood® is 100% natural with no chemicals or additives making it a user and environmentally-friendly product. Fatwood® is simply wood and the resin naturally found within that very tree, just as Mother Nature intended. When you’re ready to start a fire quickly and easily, grab two sticks of all-natural Fatwood® and leave the chemicals and noxious ingredients to the other guys. We’re better than that, and you are too.
- With a higher content of natural resin, our Fatwood® is ready to burn, wet or dry. Its naturally rough texture adds surface area, increasing ease of ignition, and the size of the sticks is perfect for stashing in a pack for a camping trip. All you need is a single match and a couple of Fatwood® sticks, it’s literally that simple.
- Add your two Fatwood® sticks to your fuel
- Light one end of each stick
- Bask in the warm, flickering glow of your success
- Crisscross two Fatwood® sticks on a grate so that the flame will move up the sticks.
- Position seasoned split firewood on top of the Fatwood® Firestarter sticks. It’s best to leave a bit of room between the Fatwood® and the firewood to allow for airflow.
- Light one end of each Fatwood® stick.
- Be safe! Make sure you replace the screen in front of the fireplace.
- Place two Fatwood® sticks into the chamber.
- Place your seasoned hardwood on the sticks, allowing some room for airflow
- Light one end of each Fatwood® stick
- Adjust the damper and enjoy your wood stove fire.
- Place two Fatwood® sticks into the burn pot.
- Light one of the ends of each Fatwood® stick. NOTE: Depending on the stove type (manual or automatic) this step may not be required. The operating instructions for your specific stove will vary.
- Start the stove and monitor it as the auger begins to drop wood pellets into the burn pot. The Fatwood® sticks will quickly ignite and spread the fire to the surrounding pellets more evenly.
- Adjust the damper and enjoy your wood pellet stove fire.
- Arrange your favorite lump charcoal or briquettes to form a pyramid. Insert 2 to 3 pieces of Fatwood® Firestarter through the pile so that the ends of the wood stick out 1 to 2 inches from the pyramid.
- Light the ends of the Fatwood® sticks and leave the fire uncovered for 10-15 minutes.
- When coals are covered with a thin layer of white ash and the Fatwood® sticks have completely burned away, your fire is ready.
Specifications
- Size
- 1.5 lb
- Brand
- Fatwood
- Mfr number
- 9983
- Item number
- 11596628
- UPC
- 023865099835
Shipping & Returns
Free shipping on orders over $35.
Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.