Fram® PH9100 Extra Guard® Oil Filter

$11.77

Free shipping on order $35+
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 10550944
MFG: PH9100

Description

Engineered for Conventional Motor Oil. Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles. 95% filtration efficiency. With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.

  • Engineered for Conventional Motor Oil
  • Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles
  • 95% filtration efficiency
  • With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
  • Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
  • 2004-1999 Chevrolet/GMC Truck, 2004-2003 GMC & 2004-2001 GMC Truck

Product Specification:

  • Anti-Drainback Valve - YES
  • Base Gasket I.D. - 3.109
  • Base Gasket O.D. - 3.453
  • Base Gasket Thickness - 0.047
  • By-Pass Valve Setting - 9-15
  • Height - 5.094
  • Inside Diameter - 13/16-16 Th'd
  • Outside Diameter - 3.66
  • Style - 1

Installation Instructions:

  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
  • Place a drain pan under the oil filter and unscrew oil filter
  • Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
  • Apply film of clean oil to filter gasket. Do not use grease
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
  • Check owner's manual for correct oil specification, viscosity and amount
  • Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Specifications

MFR:
PH9100
SKU:
10550944
UPC:
009100028044
Brand:
Fram
Length:
4
Width:
4
Height:
6