PPG SIK41072/01 ProLuxe Cetol 1 RE Transparent Satin Wood Finish, Butt

A basecoat for exterior logs, siding and other vertical wood surfaces. Penetrating alkyd-oil formula, part of a 3-coat system. High-transparency transoxide pigments amplify depth of color, clarity and substrate protection. UV absorbers protect color and wood substrate. Water-repellent. Provides a mildew-resistant finish. Block resistance for additional color options on windows and door frames. Cetol 1 RE (Reduced Emissions) Wood Finish is a transparent exterior wood basecoat to be used with Cetol 23 PLUS RE Top Coat. Its oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Covers approximately 150-400 sq ft. Coverage depends on the type, age and texture of the wood and application method.

• Color: Butternut
• Finish: Transparent Satin
• Size: 1 Gallon
• Penetrating alkyd-oil formula, part of a 3-coat system
• High-transparency transoxide pigments amplify depth of color, clarity and substrate protection
• Powerful UV absorbers protect color and wood substrate
• Water repellent
• Provides a mildew resistant finish
• Ready for use and easy to apply
• Microporous product which is waterproof, but allows wood to breathe
• Solvent based technology
• Mineral spirits clean up.

Specifications:

• Compliance: VOC
• Finish: Transparent Satin
• Applicable Materials: Siding, Garage Doors, Outdoor Furniture, Trim, Windows, Fences, Doors and Log Homes
• Application Method: Paint Brush, Spray, Roller
• Capacity: 1 gal
• Coverage: 150 - 200 sq-ft/gal On Rough And Weathered Surfaces, 250 - 400 sq-ft/gal On Smooth Surfaces Or Hardwoods
• Flash Point: 120 deg F
• Form: Liquid
• Pigment: High-Transparency Transoxide
• Resists: Harmful UV Rays and Minimize Peeling and Blistering
• Series: Cetol 1 RE, SIK410
• Type: Exterior
• Usage: For Residential and Commercial Sites, Vertical Surfaces Doors, Windows and Their Frame, Exterior Only
• Vehicles: Alkyd/Oil
• Viscosity: < 0.07 sq-cm/s
• V O C Content: < 275 g/L
• Standards: OSHA Hazard Communication
• Temperature Range: 50 - 90 deg F
• Flammability Rating: 0.63 % Lower, 6.7 % Upper
• Composition: Solvent Naphtha (Petroleum), Medium Aliph, Distillates (Petroleum), Hydrotreated Light, 2-Butanone Oxime, Cobalt Bis (2-Ethylhexanoate), Ethylbenzene
  
• Curing Time: 12 hr To Touch, 24 hr To Recoat.