Loctite® 1405603 Epoxy Extra Time, 0.85 Oz

Loctite® Epoxy Extra Time is a two-part system consisting of an epoxy resin and a hardener available in a convenient dual syringe. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high strength bond. Loctite Epoxy Extra Time sets in 60 minutes, excellent for complex multi-piece assemblies. It is used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.

• Size: 0.85 Oz
• High impact resistant
• Won’t crack when drilled
• Can be tinted
• Blends with surroundings
• Water resistant
• Can be used outdoors
• Does not shrink
• One-time application
• Sets in 60 minutes
• Ideal for complex multi-piece assemblies
• Convenient double syringe
• Dispenses equal amounts of each component every time.

Recommended For:

• Can be used with fiberglass cloth for durable patch
• Bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone

Not Recommended For:

• Continuously wet areas or water immersion
• Polyethylene, polypropylene, nylon, Teflon or flexible materials
• Applications above 120°F (49°C).

Directions:

Safety Precautions:

• Apply in a well ventilated area. Wear gloves and wash hands after use.

Preparation:

• Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion. Pre-fit parts to be joined. Remove the plug from between the piston. Cut off the end tips of the syringe. Depress the double piston to dispense equal parts of the two materials on a discardable surface. Mix resin and hardener thoroughly. Wipe syringe tips clean, retract piston slightly and close with the plug. Ensure that the plug is always placed in the same orientation on the tips.

Application:

• Apply a small amount to both surfaces, join and press together. Remove any excess glue immediately with acetone. Support until bond sets in 60 minutes at room temperature. Usable strength in 24 hours.

Cleanup:

• Clean excess glue immediately with acetone. Cured adhesive may be cut away using a sharp blade with caution. Prolonged immersion in paint stripper may soften the cured adhesive to aid removal.

Additional Info:

• Loctite® Epoxy Extra Time does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching. It can be sanded and drilled.