Devcon 24445 Flow-Mix Cold Weld Epoxy, Dark Gray, 14 ml
Devcon 24445 Flow-Mix Cold Weld Epoxy, Dark Gray, 14 ml
$11.30
SKU: 10665739
MFG: 24445
Description
Devcon® Flow-Mix® Cold Weld Epoxy is an easy alternative to welding and soldering. Can be drilled, tapped, machined, filed, sanded and painted when fully cured. This state-of-the-art syringe automatically mixes epoxy hardener and resin during application. Eliminates hand mixing, messy clean up and the difficulty of applying to your surface. Comes with two Instant-Mix nozzles. Works best on steel, copper, aluminum, bronze, metal and iron. Does not bond to polyethylene or polypropylene plastics.
- Tensile strength: 1500 PSI
- Color: Dark Gray
- Water resistant
- Handling time: 4-5 minutes
- Set time: 8-10 minutes
- Cure time: 1 hour
- Temperature range: 40 degree Fahrenheit to 200 degree Fahrenheit
- Bonds: Steel, copper, aluminum, bronze, metal, iron
- Package: 0.47 ounce (14 ml) syringe
- Carded.
Tips and Tricks:
- Pull plunger back slightly (1/8") to allow air bubbles to rise to top so that you do not push air bubbles into the flow-mix® nozzle
- To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mix in order for this product to cure properly
- Removable tape is good for putting on an area that you do not want epoxy to get on. Before the epoxy cures, remove the tape
- If you use both nozzles and there is epoxy remaining, you can hand mix.
Specifications
MFR:
24445
SKU:
10665739
UPC:
078143244452
Brand:
Devcon
Length:
10
Width:
8
Height:
3
