DeoxIT® D100L-25C Contact Cleaner Liquid Needle Dispenser, 100% Soluti

DeoxIT® D-Series D100L Electrical Contact Cleaner Liquid with needle dispenser is an unique contact cleaner, rejuvenator, conductivity enhancer and lubricant. Dissolves oxidation and corrosion on metal surfaces. Fills in microscopic gaps and reseals surface for better contact to enhance flow of electricity. Chemically improves metal-to-metal connections and contacts. Improves connector performance/reliability. Temperature range: -34 to +200OC.

• Size: 25 milliliter
• Electrical contact cleaner
• With needle dispenser
• 100% solution
• Fast acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts
• Use as a general treatment for connectors, contacts and other metal surfaces and on non-critical metal surfaces with severe oxidation and corrosion.

Features/Benefits:

• 100% Liquid, Safe on plastics.
• DeoxIT® D100L concentrate has approximately 20% chemical cleaning action.
• Excellent cleaning/deoxidizing, good protection, no ozone depletion.
• Improves conductivity and reduces intermittent connections.
• Reduces arcing, RFI, wear and abrasion.
• Cleaner Audio - Clearer Video - Reliable Data.

Directions for Use:

• Turn off, unplug the device.
• Select the applicator (pen, wipes, needle, etc.) that is best for your application, see #8 below. Apply a small amount to the metal contact/connector surface.
• Operate the part/device to help break up oxides and contamination. Wait a few minutes, then wipe off surface with clean lint-free cloth or swab to remove oxidation and contamination.
• Re-apply DeoxIT® to metal surface and wipe off excess. It is important to wipe off excess, DeoxIT® works best when a thin coating is on metal surfaces. Wait two minutes before turning on equipment. Test for compatibility before use.
• In extreme cases (severe oxidation or corrosion), you may need to leave DeoxIT® on overnight. If that is necessary; apply, then the following day remove any contaminants lifted by DeoxIT® with a lint free swab or cloth on accessible surfaces (If surface is not accessible, repeat step two above.). When surface is clean (no residue on the swab/cloth), finish with a short burst of DeoxIT®, then remove excess leaving a thin layer.
• If you notice a green or black coloration on the surface (may take a few days) after applying DeoxIT®, this indicates dissolved oxidation (surface was severely oxidized). Follow step "2-5" above one more time.
• Applicators: Oiler Squeeze Bottle (#D100L-25C): Similar to Oiler Pen, except in squeeze bottle.