DeoxIT® G100L-2DB Gold G100L G-Serie Brush Applicator, 100% Solution,

DeoxIT® Gold G100L, G-Series Liquid (100%) Brush Applicator is an unique contact cleaner, conditioner, enhancer, lubricant and protectant for PLATED metal surfaces. Improves conductivity, maintains optimum signal quality, reduces fretting and dendrite corrosion, and stabilizes connections between similar and dissimilar metals. Molecularly bonds to both base-metals and plated surfaces and seals out oxygen, protecting both surfaces. The DeoxIT® Gold coating is excellent at reducing wear abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for gold plated surfaces. On oxidized surfaces, pre-treat with DeoxIT® D-Series contact cleaner.

• Size: 7.4 milliliter
• Electrical conditioning solution brush applicator
• 100% solution
• Use on plated connectors, contacts and metal surfaces for maximum performance and protection
• Recommended for critical applications where only slight cleaning action is necessary
• Designed to dissolve small amounts of oxidation
• Unique conditioning solution that improves conductivity and provides long lasting protection on gold, base metals and other precious metal contacts and connections gold, silver, rhodium, copper, bronze, nickel, etc.

Features/Benefits:

• 100% Liquid, Safe on plastics.
• DeoxIT® Gold G100L concentrate has approximately 0.5% chemical cleaning action.
• Excellent conductivity enhancing, excellent protection, minimum cleaning/deoxidizing, no ozone depletion. Prevents dendrite and fretting corrosion. Protects base metals.
• Reduces intermittent connections, arcing, RFI, wear and abrasion. Ideal for both stationary and moving (vibration) connections.
• Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications.
• Cleaner Audio - Clearer Video - Reliable Data.

Directions for Use:

• Turn off, unplug the device.
• On surfaces that have been in service or have visual signs of oxidation or corrosion pre-treat with DeoxIT® D-Series contact cleaner (see Data Sheet DeoxIT® D-Series).
• Next, select a DeoxIT® Gold G-Series applicator (pen, wipes, needle, etc.) that is best for your application, see #8 below. Apply a small amount to the metal contact/connector surface.
• Operate the part/device to help distribute the DeoxIT® Gold and break up minor amounts of oxides and contamination. Test for compatibility before use.
• Re-apply DeoxIT® Gold to metal surface and wipe off excess. It is important to wipe off excess, DeoxIT® Gold works best when a thin coating is on metal surfaces. Wait two minutes before turning on equipment. Test for compatibility before use.
• If you notice a green or black coloration on the surface (may take a few days) after applying DeoxIT® Gold, this indicates dissolved oxidation (surface was severely oxidized). Follow step "2-5" above one more time.
• For severe environment protection: After surface is clean, apply DeoxIT® Shield S-Series for outdoor and severe environments (humidity, salts, pollutants, sulfur, etc.).
• Applicators: Brush (#G100L-2DB): Small 7.4 mL bottle with brush applicator. General purpose for applying liquid with a nylon brush. Ideal for applying to outer and inner surface with wiping action. Care should be taken to keep brush clean.