Sta-Kool® SK-3909 White Elastomeric Roof Patch, 10.1 Oz

Sta-Kool® White Elastomeric Roof Patch is an extra tough, liquid rubber repair compound designed to patch splits, cracks, and holes up to 1" in most roof surfaces. This water-based product dries quickly to a non-tacky finish and is easy to use and clean up. Sta-Kool® 390 should be used with Stress Block 170 Seam and Repair Fabric. Sta-Kool® 390 remains flexible while it expands and contracts with your repair, making it ideal to use with all Sta-Kool®products.

• Size: 10.1 Qz
• An extra tough, flexible repair compound designed to patch splits, cracks & holes in roof surfaces
• Water based patch dries quickly & offers great adhesion to all coatings applied over it
• Designed to repair cracks & holes up to 1" in width
• Remains flexible while it expands & contracts with your repair
• Do not allow to freeze
• Surface must be clean & dry
• Allow to cure 24-48 hours.

Preparation:

• All surfaces must be dry and free of dust, dirt, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with a suitable primer before application of this product. Washing entire surface is recommended for best results. Surfaces with mildew growth or stains must be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Be certain all surfaces are thoroughly rinsed and dry prior to applying patching material.

Application:

• For best results, apply in early morning hours on clear sunny day. Surface and air temperatures must be a minimum of 65°F and rising. DO NOT apply if heavy dew or rain is expected within 24-48 hours. Apply with a stiff bristled paint brush. Coat entire damaged area and extend 2” beyond damaged area. Embed Universal Patching Fabric into the repair while wet. Apply second layer of patch, brushing over and into embedded fabric. Allow to cure 24-48 hours and coat entire roof with a Sta-Kool® reflective roof coating. DO NOT THIN. If roof becomes hot (over 100° F) during application, lightly mist roof surface with water spray to prevent coating from drying too fast. Remove any excess or puddling water prior to coating. If roof surfaces become soiled with age, due to the elements, Sta-Kool® 390 can be cleaned with a mild solution of bleach and water. Excess scrubbing should be avoided. If coloring is desired, a typical addition of 3-4 ounces per gallon of Universal colorant can be added, which will result in light ppastel colors.

Coverage rate:

• Approximately 25 sq. ft. per gal.

Clean-up:

• Clean tools with soap and water.