Oregon® R50 Micro-Lite™ 90SG Replacement Saw Chain, 50 Drive Links, 14"

Oregon® Micro-Lite™ 90SG Replacement Cutting Chain is made for small saws and features a chamfer-chisel cutter design that outcuts competitive chains. 90SG cuts a narrow kerf, requiring less power from the saw than standard chains to make the same cut. Micro-Lite™ 90SG is a low-vibration/low-kickback chain which meets both the ANSI (U.S.) and CSA (Canadian) low-kickback requirements. This chain is ideal for homeowners or consumer users, and is equally well suited for commercial cutters such as arborists and orchardists. Micro-Lite™ 90SG is designed for use on electric saws with bars up to 16" (41 cm), and on small gasoline-powered saws up to 2.5 cubic inches (41cc) with bars up to 14" (35 cm). 90SG is compatible with all existing 91-type drive sprockets, and its narrow .043" gauge requires the use of a Micro-Lite™ bar. 90SG chain is part of a Micro-Lite™ narrow-kerf cutting system that requires less power from the saw to cut than standard cutting systems.

• Fits Stihl® and Stihl® pole saws
• Low-kickback chain
• Low-vibration chamfer-chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
• Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
• Always install 90SG chains on a .043" gauge Micro-Lite™ bar (MLE part numbers) to obtain all the advantages of the Micro-Lite™ system. 90SG chain does not fit .050" gauge bars intended for 91-series chains
• Top-plate witness mark makes accurate sharpening easier
• LubriLink™ tie straps help keep oil where it's needed - on the chain
• Vibe-Ban™ chassis design reduces vibration 25% or more at the chainsaw's handles
• LubriWell™ oil holes help carry oil around the full length of the guide bar's groove.
• Micro-Lite™ is the name for our "narrow-kerf" chain-and-bar cutting systems. Cutting a narrower kerf allows your saw to cut faster and more efficiently. Use a Micro-Lite™ chain in team with a Micro-Lite™ bar for maximum results.
• Vibe-Ban™ is the name for our family of "low-vibration" chains, designed and built with features that will reduce the risk of vibration-related injury.
• A tie-strap reservoir and a drive-link hole, respectively. These simple features help keep oil where it's needed and improve the lubrication of your bar and chain for better performance and longer life.
• Outstanding performance, fast and efficient cutting
• Excellent stay-sharp
• Smooth feel during use, smooth cut surfaces
• Reduces the tendency of saws to "skate"
• Reduces the risk of vibration-related injury
• Less power is required to make the same length of cut
• Helps the saw cut faster
• Less power is required to drive the chain
• Lighter weight, helps minimize user fatigue*
• Improved chain and bar lubrication, helps keep oil drive links where it's needed, reduces volume of oil required
• Makes sharpening easier
• Low kickback, meets ANSI and CSA standards
• Stabilizes the cutter for faster smoother cutting
• Identifies 90SG as a low-vibration chain
• Indicates the proper chain-cutting direction
• Makes it easier to hold the file at the correct angle during sharpening
• Makes it easy to break 90SG chain from reels
• Helps reduce stretch.

Free shipping on orders over $35. Usually ships within 24 hours.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.