Fram PH3786 Extra Guard® Spin On Oil Filter

Engineered for conventional motor oil. Cellulose and glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2.

• PH3786
• Spin on oil filter
• Advanced engine protection uses cellulose & synthetic glass fiber blended media to provide 3 times more engine protection than the average of leading economy oil filters
• 95% dirt trapping efficiency.
• With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, fram extra guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
• Extra guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
• Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
• Place a drain pan under the oil filter and unscrew oil filter
• Clean mounting base making sure the "o" ring from the old filter is not stuck to the filter mount
• Apply film of clean oil to filter gasket. Do not use grease
• Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
• Check owner's manual for correct oil specification, viscosity and amount
• Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
• Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Shipping calculated at checkout. Usually ships within 24 hours.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.