Fram CH9018 Extra Guard® Oil Filter

Engineered for conventional motor oil. Cellulose and glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2.

• CH9018
• Advanced Engine Protection Uses Cellulose & Synthetic Glass Fiber Blended Media To Provide 3 Times More Engine Protection Than The Average Of Leading Economy Oil Filters
• 95% Dirt Trapping Efficiency
• Engineered for Conventional Motor Oil
• With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, fram extra guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
• Extra guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
• Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
• Place a drain pan under the oil filter and unscrew oil filter
• Clean mounting base making sure the "o" ring from the old filter is not stuck to the filter mount
• Apply film of clean oil to filter gasket. Do not use grease
• Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
• Check owner's manual for correct oil specification, viscosity and amount
• Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
• Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Free shipping on orders over $35.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.