Liquid Nails

Liquid Nails® LNP-903 Heavy Duty Construction Adhesive, 28 Oz

Item # 10262422Mfr # LNP-903UPC 022078450310

$14.60

Free shipping on order $35+
Usually ships within 24 hours
1.00000
Request a Bulk Quote

Thank you for your quote request. We will be in touch.
Product Overview

This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/adhesion. It's also considered a "green glue" because it is low-VOC.

  • Heavy duty
  • Exceptional holding power
  • Interior & exterior grade
  • Excellent gap filling
  • VOC-compliant "green glue"
  • 20-minute open time
  • Contributes to LEED® certification
  • Contributes toward NAHB National Green Building Standard™ certification of the structure
  • Many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).
  • Flooring applications, ceramics, mirrors, granite, marble, plastic or vinyl.
  • For best results, construction adhesive and both surfaces should be above 60°F. All substrates must be structurally sound and free from grease, dust, dirt and flaking coatings. New plaster must be fully cured before applying construction adhesive.
  • Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire.
  • Apply 1/4" bead of construction adhesive directly onto studs and plates. Press drywall firmly against construction adhesive. Adjust as necessary. Holding drywall's outer edges, nail every 16" and inside the field as necessary. Note: If studding is perfectly true, nailing inside field will not be required.
  • Apply 1/4" bead of construction adhesive to rafters. Fasten drywall's outer edges with nails 12" on center. Fasten center of field with a nail at each rafter. Drywall larger than 4' x 8' should be fastened with 2 nails in the field of each rafter.
  • Apply 1/4" bead of construction adhesive to structure. Some uses include drywall to drywall and drywall to block walls.
  • If the construction adhesive is wet, use soap and water. If the construction adhesive has dried, use mineral spirits.
  • 70 GPL
  • ASTM C-557.
Specifications
Size
28 ounce
Using a 1/4" (.64 cm) bead
28 fl. oz. cartridge covers 88 lineal ft.
Working time
Up to 20 minutes. Very warm temperatures will decrease working time. If construction adhesive becomes dry, scrape it off and reapply.
Brand
Liquid Nails
Mfr number
LNP-903
Item number
10262422
UPC
022078450310
Shipping & Returns

Free shipping on orders over $35. Usually ships within 24 hours.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.