Gorilla 8005202 All-Purpose Construction Adhesive, 9 Oz

Gorilla Construction Adhesive is a tough, versatile, and water resistant formula that instantly grabs surfaces, offers superior strength, and bonds virtually any surface including wood, drywall, concrete, paneling, trim & molding, ceramic, tile, and more! This all-purpose construction adhesive can be used indoor and outdoor, is repositionable for up to 15 minutes, is paintable, and is easy to clean up with soap and water.

• Size: 9 ounce
• All Purpose
• Instant grab - holds in 0 seconds
• Easy to dispense
• Repositionable up to 15 minutes
• Paintable
• Indoor/outdoor - water resistant
• Easy Clean Up
• Low Odor.
• Meets ASTM C557: Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing.

Directions:

• To Open: Cut nozzle at 45 degree angle to desired bead size. Puncture inner foil seal.
• To Use: All surfaces should be clean and free of dirt, grease and oil. One surface must be porous. Best if used above 40 degreeF.
  
  • Insert into cartridge gun.
  • Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
  • Within 10 minutes, press surfaces firmly together. Repositionable for up to 15 minutes.

NOTE: Heavy items may require temporary support.

Specifications:

• Application Temperature: Best above 40 degree F
• Service Temperature: 0 degree to 120 degree F
• Indoor: Yes
• Outdoor: Yes
• Moisture Resistant: Water Resistant
• Paintable: Yes, in 1 hour using acrylic/latex paints. All other paints, wait 24 hours.
• Sandable: Yes
• Stainable: No
• Cured Color: Tan
• Technical Standards: Meets ASTM C557 and ASTM D3498: dry lumber specifications.
• Storage Tips: Store in a cool, dry location. Do not freeze. Store away from children and animals.

FAQs:

What is the best way to open the Gorilla Construction Adhesive cartridge?

• Cut nozzle at a 45 degree angle to your desired bead size.
• Puncture the foil seal inside the tube using a long, thin, sharp object. Foil must be punctured sufficiently for formula to flow through.

What is the best way to prepare surfaces for bonding?

• All surfaces should be clean and free of dirt, grease and oil. One surface must be porous (e.g. wood, brick, etc.).

What's the best way to store Gorilla Construction Adhesive?

• Gorilla Construction Adhesive is best if stored in a cool, dry location. Do not freeze. Store away from children and animals.

Is Gorilla Construction Adhesive VOC compliant?

• Yes, Gorilla Construction Adhesive has less than 3% VOC content.

How do I remove Gorilla Construction Adhesive from my surface?

• To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project with soap and water. For cured/dried adhesive, mechanical means such as cutting, sanding, or scraping are necessary.

How do I remove Gorilla Construction Adhesive from my body/skin?

• Wash skin with soap and warm water.