Simpson Strong-Tie SET-XP10 High-Strength Epoxy Tie Anchoring Adhesive, 8.5 Oz

$28.99

Created with Sketch.
Shipping charges calculated at checkout.
Created with Sketch.
Shipping not available to AK,AE,AA,AE,AE,AE,AP,FM,GU,HI,MH,MP,PW,PR,VI
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.
Out of Stock

SKU: 11371915
MFG: SET-XP10

Description

Ideal to be used under static and seismic loading conditions in both cracked and uncracked concrete, this epoxy tie has low-odor formula dispenses easily at below-freezing temperatures excluding the need to warm cartridge. Passed the demanding adverse condition tests by ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep. Cures in substrate temperatures as low as 14°F in 24 hours or less.

  • At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep
  • Code-listed per iapmo ues ER-263
  • Can be used under static and seismic loading conditions in both cracked and uncracked concrete
  • Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
  • Cures in substrate temperatures as low as 14°F in 24 hours or less
  • Easiest hole-cleaning method – no power brushing needed
  • When properly mixed, adhesive will be a teal color for easy identification.

Uses / Applications

  • Threaded rod anchoring into concrete
  • Rebar doweling into concrete
  • Suitable for horizontal, vertical and overhead applications

Shelf Life

  • Nine months from date of manufacture in unopened cartridge.

Storage Conditions

  • For best results, store between 45°F–90°F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.

Clean Up

  • Uncured material — wipe up with cotton cloths. If desired, approved solvents, such as ketones (mek, acetone, etc.), lacquer thinner, or adhesive remover can be used. Do not use solvents to clean adhesive from skin. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material — chip or grind off surface.

Gel Time:

  • Under the ASTM C 881 test method, 3.5 minutes for a 60g mass at 73°F (23°C).
WARNING: This product contains chemicals like Bisphenol-A and Epichlorohydrin which are listed by the State of California as known to cause Reproductive harm. www.P65Warnings.ca.gov

Specifications

MFR:
SET-XP10
SKU:
11371915
UPC:
707392233602
Brand:
Simpson Strong-Tie
Length:
3
Width:
3
Height:
10
Attachment: