Field Controls 8-RC/BT Draft Control with Black Tee, 8"

$107.34

Created with Sketch.
Eligible for FREE SHIPPING
Created with Sketch.
Usually ships within 24 hours
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 11581886
MFG: 8-RC/BT

Description

Field Draft Controls maintain consistent draft by counteracting the negative forces caused by changes in temperature and barometric pressure, as well as the effects of wind. For proper operation and efficient fuel consumption in oil, gas, and/or coal-fired heating appliances, draft must remain constant. When it is, combustion is more complete, fuels are utilized efficiently, and money is saved.

  • Diameter: 8"
  • With black tee
  • Cuts fuel costs in oil, kerosene, coal and wood fired stoves/heaters
  • Reduces flue temperature

How Draft Controls Work

  • Static pressure of the cool air (1) Illustration A exerts pressure on the outside of the furnace or boiler, the breaching, and stack. The pressure difference between the room air and heated gas (air) causes products of combustion (2) to flow (draft) through the unit and rise through the breaching and chimney.
  • Room temperature air (3) enters through the barometric draft control (4) in the precise amount needed to overcome the excess drafts caused by temperature variations, wind fluctuations, and barometric pressure changes.
  • Combustion of fuel is complete and the process is stabilized. The velocity of combustion gases through the heat exchanger is slowed so more heat is extracted. The unit operates more efficiently, reliably, and requires less maintenance.

When to use a Draft Control

Draft Inducers/Power Venters:

  • With these devices, draft is increased or created, causing fluctuations in air flow through the combustion chamber. These fluctuations can be negated by the use of a barometric draft control located between the draft inducer or power venter and the furnace, boiler, or water heater it services. Use a single-acting control for oil and gas-fired equipment with a power vented system. Use a single acting control for oil, and a double-acting control for gas-fired equipment with a draft induced system

Power Burners:

  • A power burner is designed so that a fan delivers negative air pressure to the combustion chamber. A single acting draft control for oil maintains that negative pressure.
  • A power burner designed to burn natural or LP gas operates in the same manner. While a draft hood (diverter) is often used on gas units fired with an atmospheric burner, a double-acting barometric draft control should be used for furnaces or boilers fired with power burners.

Forced Draft Burner

  • Forced Draft installed with a stack height in excess of 30' will probably develop excessive natural draft, reducing the amount of pressure within the furnace or boiler. A barometric draft control will help eliminate this undesirable stack action and permit the unit to be pressurized.

Dual Fuel Appliances:

  • Burners capable of burning either gaseous fuels or oil should be equipped with a barometric draft control. We suggest using a double-acting control on units where fuels are frequently changed. The double- acting feature is important for gas-firing appliances because it allows spillage of combustion products in case of blocked flues or down-drafts. To detect flue gas spillage on dual fuel installation, a Field Thermal Safety Switch is recommended.

Gas-Fired Appliances:

  • Gas-fired furnaces and boilers generally require a double-acting draft control. Like a single-acting control, it opens inwardly to maintain a uniform draft. But, unlike a single-acting control, it is also free to open outwardly to spill the products of combustion, in case of blocked flues or down-drafts.
  • National codes often mandate the use of a draft control. Usage is generally limited to furnaces or boilers designed for use with power burners and incinerators. Draft controls are generally used when oil-fired units are converted to gas.

Specifications

MFR:
8-RC/BT
SKU:
11581886
UPC:
090747525003
Brand:
Field Controls
Length:
14
Width:
14
Height:
9
Weight:
8.0 lb