Dap® 7079818915 Kwik Seal Ultra™ Premium Siliconized Sealant, Clear, 5

DAP® KWIK SEAL ULTRA™ is a high performance, premium siliconized kitchen and bath sealant that repels water, stains and dirt so the sealant stays looking clean, fresh and new. It has stain proof protection and is guaranteed to stay mold and mildew free for the life of the sealant. It can be exposed to water in as little as 4 hours after application without washing out, putting the area in service sooner. KWIK SEAL ULTRA™ is 100% waterproof and crack proof, applies easily and smoothly, is low in odor, safe for granite and marble and cleans up water. Interior use.

• Color: Clear
• Size: 5.5 ounce
• Easy clean
• Repels water, dirt and stains
• Stain proof protection
• Lifetime mold and mildew resistance guarantee
• Sealant stays looking clean, fresh and new
• 100% waterproof
• Crack proof
• Safe for granite and marble
• Water ready in 4 hours
• Easy water cleanup and low odor
• Interior.

Suggested Uses:

Ideal for sealing:

• Tubs
• Sinks
• Backsplashes
• Showers
• Countertops
• Toilets
• Fixtures
• Loose Tile Repair
• Cracks and Joints.

Adheres To:

• Ceramic/Porcelain
• Glass
• Most Plastics
• Granite, Cultured Marble and Natural Stone
• Wood
• Metal
• Drywall
• Fiberglass
• Painted Surfaces

Performance Characteristics:

• Repels water, stains and dirt
• Lifetime mold and mildew resistance guarantee
• Stain proof protection
• Water ready in 4 hours
• 100% waterproof and crack proof
• Safe for granite and marble
• Easy water cleanup and low odor
• Not paintable
• Sealant applies white and dries clear in 7-14 days (depending on joint depth, temperature and humidity).

For Best Results:

• Apply in temperatures above 40°F.
• Not for continuous underwater use, high temperature surfaces or surface defects.
• Joint size should not exceed 3/8” wide by 3/8” deep. For joints deeper than 3/8”, use backer rod.
• Store product away from extreme heat or cold.

Surface Preparation and Application:

• Surface must be clean, dry and free of all old sealant, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
• Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size. If using the cartridge, puncture inner foil seal and load into caulk gun.
• Fill gap with sealant, pushing sealant ahead of nozzle.
• For a neat finish, smooth bead of sealant immediately with a finishing tool.
• Allow sealant to dry for at least 4 hours before exposing to water. Sealant reaches full performance in 24 hours.
• Clean up excess uncured sealant with damp sponge before it skins over. Scrape or cut away excess cured sealant.
• Regular cleaning of surrounding areas is suggested.
• Reseal tube/cartridge for future use.

Physical and Chemical Characteristics:

• Tooling Time: 3-5 minutes
• Tack Free Time: 8-10 minutes
• Paintable: No
• Odor: Very Mild
• Consistency: Smooth and Creamy
• Vehicle: Acrylic Polymer
• Volatile: Water
• Flash Point: None
• Filler: Titanium Oxide
• Density: 1.03
• Solids: 58% by weight
• Weight per Gallon: 8.60 lbs/gallon
• Temperature Service Range: 0° F to 170°F
• Temperature Application Range: 40ºF to 100ºF
• Freeze Thaw Stability: Passes 5 Cycles
• Applications: Interior
• Shelf Life: 12 Months
• Coverage: 5.5 fluid ounces: 30 linear feet at a 3/16" diameter bead or two average size bathtubs.

Clean Up and Storage:

• Remove excess uncured sealant with a damp cloth/sponge before it dries. After sealant has dried, excess sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold.