Fram® PH30 Extra Guard® Mid Size Oil Filter

$12.10

Free shipping on order $35+
1

Request a Bulk Quote

Thank you for your quote request. We will be in touch.

SKU: 10044118
MFG: PH30

Description

Engineered for Conventional Motor Oil. Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles. 95% filtration efficiency. With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.

  • Engineered for Conventional Motor Oil
  • Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles
  • 95% filtration efficiency
  • With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
  • Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles
  • For use with Aero Marine, Allis-Chalmers, 89-81 Avanti, Buchanan Marine, 93-91 Buick, 87-77 Buick, 75-73 Buick, 71-68 Buick, 93-90 Cadillac, 82-64 Checker, 97-58 Chevrolet, 90-63 Chevrolet/GMC Truck, Chris-craft Marine, Crusader Marine, Daytona Marine, Evinrude Marine, EVO, Flagship Marine, 78-77 GMC, GMC Gasoline, 87-62 GMC Gasoline, Hyster, Indmar Marine, John Deere, Johnson, Marine Power, Massey-Ferguson, Mercruiser Marine, New Idea, 92-91 Oldsmobile, 87-73 Oldsmobile, 71-66 Oldsmobile, OMC Marine, Pleasurecraft Marine, 97-70 Pontiac, 65-64 Pontiac, Rockwell, 66-65 Studebaker, Sullair, Volvo Penta Marine, Webbe & Yamaha Marine

Product Specification:

  • Anti-Drainback Valve - NO
  • Base Gasket I.D. - 3.14
  • Base Gasket O.D. - 3.563
  • Base Gasket Thickness - 0.25
  • By-Pass Valve Setting - NONE
  • Height - 4.063
  • Inside Diameter - 13/16-16 Th'd
  • Outside Diameter - 3.781
  • Style - 1
  • Turning Specification - 3/4-1

Installation Instructions:

  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
  • Place a drain pan under the oil filter and unscrew oil filter
  • Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
  • Apply film of clean oil to filter gasket. Do not use grease
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
  • Check owner's manual for correct oil specification, viscosity and amount
  • Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.

Specifications

MFR:
PH30
SKU:
10044118
UPC:
009100380197
Brand:
Fram
Length:
6
Width:
6
Height:
4