Toggler® 50470 Alligator® AF6 Flanged Solid Wall Anchors w/Screws, 1/4

Completely solid anchor with circular cross-section. Causes all forces from mating screw to be fully transmitted to the wall of the hole. Provides full compressive holding over entire length of screw. Flanged for use where a cavity is anticipated (drywall, hollow brick, etc.). Can be more closely spaced than other solid-wall anchors. Fins prevents spinning and countersink even when using a screw gun. Anchor bonds screw to concrete, brick and stone, sealing the hole against moisture. Versatile – holds securely even in hollow walls and ceilings. Non-corrodible – safely used with stainless steel screws in corrosive environments. Screws anchored with ALLIGATOR® anchors have very high residual holding strength and low susceptibility to failure by vibration or shock loads. Screw can be removed and reinserted in same anchor with little or no damage and without loss of holding power.

• 6 pack
• 1/4" drill diameter
• Minimum wall thickness 3/8"
• Included screw #10 x 1-1/2"
• Versatile & easy to install
• AF6 Flanged Solid Wall Anchors
• Works on any building material & many different sizes
• Types of screws can be used with the same diameter anchor
• Replaces plastic plugs & screw anchors as well as metal masonry screws & wedge anchors
• Out holds metal anchors of comparable size for a fraction of the cost
• Special corrosion proof polymer absorbs shock & vibration
• Completely solid anchor with circular cross-section
• Causes all forces from mating screw to be fully transmitted to the wall of the hole
• Provides full compressive holding over entire length of screw
• Flanged for use where a cavity is anticipated (drywall, hollow brick, etc.)
• Can be more closely spaced than other solid-wall anchors
• Fins prevents spinning and countersink even when using a screw gun
• Anchor bonds screw to concrete, brick and stone, sealing the hole against moisture
• Versatile – holds securely even in hollow walls and ceilings
• Non-corrodible – safely used with stainless steel screws in corrosive environments
• Screws anchored with ALLIGATOR anchors have very high residual holding strength and low susceptibility to failure by vibration or shock loads
• Screw can be removed and reinserted in same anchor with little or no damage and without loss of holding power.